JFE/JSM 日本钢铁株式会社标准物质
JFE 日本钢铁标准物质
日本JFE钢铁简介
日本JFE钢铁拥有90年的历史，是世界十大钢铁公司之一。JFE钢铁在中厚钢板方面以其经验、研究和开发为基础，每年在谋求设备改进、品种增多以及充实质量管理上做出了不懈的努力，满足了广大客户的要求。JFE钢铁在日本拥有3处世界上最先进的中厚钢板工厂，可制造5350mm宽，360mm厚的各种中厚钢板产品，如高强度钢板、耐磨钢板、低温用钢板、锅炉、压力容器用钢板、镍类高耐大气腐蚀钢板、不锈钢板、各种复合钢板等，产量超过数百万吨。
JFE，JFE Steel Corporation，日本钢铁株式会社；
JFE-TEC，JFE Techno-Research Corporation，JFE-TEC是日本高分子材料品质分析领导者；
JFE-TEC已获得以下认证，以努力提供高度可靠的标准参考材料。
ISO 9001质量管理体系认证ISO
14001环境管理体系认证ISO
17025认证测试和校准实验室
我们的产品在日本先进工业科学技术研究所的日本国家计量研究所(NMIJ)运营的日本标准参考材料综合信息服务(RMinfo)注册。
标准物质目录
Nickel Ore Original Standard Reference Materials 镍矿原标准物质
Specimen form and size: Powder, 50 g per bottle
(%)
Specimen No. T.Ni T.Co T.Fe MgO CaO SiO2 T.Cr Al2O3
JSM O800-1 2.27 0.053 14.2 26.2 0.030 35.7 0.70 0.98
JSM O800-2 2.07 0.036 11.5 23.3 0.37 45.4 0.57 1.27
JSM O800-3 1.90 0.072 15.0 26.1 0.034 34.9 0.84 0.84
For antimony and tin analysis 锑和锡元素分析标准物质
Specimen form and size: 40 mm (D) × 4 mm (T), a set of 4 levels
Specimen No. Sb(%) Sn(%)
JSM P711-1 (a – d) ＜ 0.001 – 0.079 –
JSM P712-1 (a – d) – ＜ 0.001 – 0.101
For X-ray Fluorescence Analysis，X射线荧光分析标准物质
For hazardous component analysis [for compliance with RoHS Directive]
Specimen form and size: Sheet (30 × 30 mm, 3 mm [T]), a set of 7 levels
Specimen No. Cd Pb Hg Cr As Br
Unit (μg/g) (%)
JSM P 710-1 (a – g) <1 - 1.11×103 <1 - 1.12×103 <1 - 1.09×103 <1 - 1.10×103 <1 - 1.95×103 <0.001 - 0.62*
* : Reference value
Your instrument may, depending on its performance, be affected by coexisting elements and may not be able to measure accurately.
Guidelines for applicability (Before measurement, please confirm charts and the linearity of the calibration curve of the instrument to be used.)
Cd Pb Hg Cr As Br
Wavelength dispersive X-ray fluorescence spectrometer - - - - - *
Energy dispersive X-ray fluorescence spectrometer - - - N/A N/A *
-:Applicable N/A:Not applicable *:Please inquire (Determined based on measurements by JFE-TEC)
For Chemical Analysis，化学分析标准物质
For hazardous component analysis [for compliance with RoHS Directive]
Specimen form and size: Grains, 50 g per bottle
Specimen No. Cd Pb Hg Cr As Br Cl S
Unit (μg/g) (%)
JSM P 700-1 5.0 5.0 5.3 4.9 9.1 0.002* 0.004* 0.006*
JSM P 701-1 113.5 111.3 111.6 114.8 187.3 0.05* 0.06* 0.04*
*: Reference value
For trace element analysis
Specimen form and size: Grains, 50 g per bottle
(%)
Specimen No. F Na Mg Al Si P S Ca
JSM P 702-1 - 0.0012 0.0015 0.0012 0.0008* 0.0011 0.0014* 0.0013
JSM P 703-1 0.018* 0.024 0.029 0.022 0.018 0.017 0.021* 0.023
Specimen No. Ti Zn Fe Cl Cr
JSM P 702-1 0.0009 0.0010 0.0015 0.0017* 0.0012
JSM P 703-1 0.017 0.020 0.021 0.018* 0.020
*: Reference value
Plastic Original Standard Reference Materials
Utilizing our technologies for manufacturing iron and steel-related standard reference materials, we sell plastic standard reference materials containing various added components for application to chemical analysis and instrumental analysis.
Specimens suitable for analysis to ensure compliance with the EU's RoHS Directive are also available.
Material: Polyethylene
Specimens for analysis of C and S in steel
Specimen form and size: Fine grains, 150 g per bottle
(%)
Specimen No. C S
JSMM 451-1 0.93 0.0096
JSMM 452-1 2.78 0.011
JSMM 453-1 3.2 0.0136
JSMM 454-1 3.73 0.0298
Standard Reference Specimens for Analysis of Tramp Elements in Cast Iron
Announcing the launch of a new series of JFE-TEC's original standard reference specimens
The needs for impurity management regarding tramp elements, or elements that adversely affect materials, is growing in the iron and steel sector, driven by the expanding use of scrap.
To meet such needs, JFE-TEC has launched the production and sale of standard reference specimens of which multiple trace amounts are added to cast iron.
Product Features
Metals and Elements Available
Product Features
With a trace amount of standard reference specimens intentionally added to cast iron, these standard reference specimens can be used for inspecting equipment, etc.
Through the centrifugal casting method for quenching during the casting process, these specimens become highly homogeneous and thus help you obtain highly reproducible results in instrumental analysis (meeting JIS repeatability standards).
We can produce specimens containing simultaneous additions of five levels of Cr and Pb in compliance with ELV and RoHS directives (subject to consultation).
We can also provide services to produce quenched specimens by melting alone of specimens with client-supplied materials (subject to consultation).
(Please note that the composition of the produced specimens is not equal to the original composition.)
Examples of Standard Reference Specimens Containing Tramp Elements
(Analysis values based on instrumental analysis) (%)
C Si Mn P S
n-1 2.83 2.02 0.195 0.0077 0.0046
n-2 2.83 2.02 0.194 0.0076 0.0046
n-3 2.86 2.03 0.194 0.0074 0.0046
n-4 2.83 2.02 0.195 0.0077 0.0048
n-5 2.84 2.01 0.194 0.0075 0.0046
Average 2.84 2.02 0.194 0.008 0.005
σn-1 0.0102 0.0090 0.0004 0.00013 0.0009
Mg Ni Cr Mo V Nb Ti Co
n-1 0.0020 0.0044 0.0058 0.0002 0.0003 0.0017 0.0002 0.0041
n-2 0.0019 0.0044 0.0059 0.0002 0.0003 0.0016 0.0002 0.0041
n-3 0.0019 0.0045 0.0062 0.0002 0.0003 0.0016 0.0003 0.0042
n-4 0.0021 0.0045 0.0064 0.0002 0.0003 0.0018 0.0002 0.0043
n-5 0.0019 0.0044 0.0061 0.0002 0.0003 0.0016 0.0002 0.0041
Average 0.002 0.004 0.006 0.0002 0.0003 0.0017 0.0002 0.0042
σn-1 0.0001 0.0001 0.0002 0.0000 0.0000 0.0001 0.00004 0.0001
Al B Sn Cu Pb Sb Ca W
n-1 0.0051 0.0012 0.0002 0.0057 0.0022 0.0003 0.0006 0.0089
n-2 0.0051 0.0011 0.0002 0.0058 0.0021 0.0003 0.0006 0.0084
n-3 0.0051 0.0011 0.0003 0.0057 0.0022 0.0003 0.0006 0.0087
n-4 0.0052 0.0012 0.0002 0.0060 0.0022 0.0003 0.0006 0.0092
n-5 0.0051 0.0011 0.0002 0.0062 0.0023 0.0003 0.0006 0.0097
Average 0.0051 0.0011 0.0002 0.0059 0.0022 0.0003 0.0006 0.0090
σn-1 0.00004 0.00005 0.00004 0.0002 0.00008 0.0000 0.0000 0.0005
Metals and Elements Available for Prototyping
Carbon steel, stainless steel, refractory alloy steel
Ni-base alloys
Copper alloys and aluminum alloys: Subject to consultation
Tin alloys (including solder): Subject to consultation
Gold and platinum alloys
Added elements: C, Si, Mn, P, S, Al, Cu, Ni, Cr, Mo, V, Nb, Ti, B, Ca, Sn, Sb, Bi, Pb, Te, Co, W, Ta, Zr, In, Se, Sr, Ba, La, Ce, (N: subject to consultation)
Standard reference specimens for analysis of tramp
elements in cast iron
Cast iron specimen